Products
Lifter bushings
for the conversion of type4 and WBX engine cases, to use type1 lifter
Advantage of type1 lifter, is the lower weight, compared to the type4 lifter
The sockets are simply pressed into the tappet bores, subsequent reaming deleted
Made in Germany
Price: 60,-EUR / set incl. VAT
Installation:
1.
The lifter bore should be lowered by 7mm
2.
Heat up the motor housing / tappet bores to about 80 ° C
3.
Lubricate the bushes outside with oil !!!
4.
Then press into the tappet bores
